DA-2500 II

Digital amplifier
DA-2500 II is a professional power amplifier with a maximum output power of 2 x 1300W @ 8-ohm / 2 x 2500W @ 4-ohm / 2 x 4800W @ 2-ohm and a maximum bridged output power of 9000W (RMS) @ 4-ohm. The unit offers comprehensive protection circuits for output current, DC, high temperature, very high frequency (VHF), short circuit, open load, mains fuse protection and soft start. All channels are bridgeable with automatic -6dB summing compensation. DA-2500 II comes with guaranteed high efficiency, sonic transparency and has proven its durability in extreme touring conditions.
Rated output power (8-Ohm): 2 x 1300W
Rated output power (4-Ohm): 2 x 2500W
Rated output power (2-Ohm): 2 x 4800W
Rated output power (Bridge @ 16-Ohm): 2600W
Rated output power (Bridge @ 8-Ohm): 4600W
Rated output power (Bridge @ 4-Ohm): 9000W

Input Impedance: 20K ohm
Frequency Response: 2.3Hz~56KHz
THD: <0.05%
Crosstalk (at 1Khz): > 70 dB
Signal to noise ratio: >112dBA
CMR: 50 dB
Protections: Excessive output current, Full short-circuit, Open-circuit, Thermal, Soft-Start, DC voltage, very high frequency (VHF) & mains fuse protection
Voltage Peak Limiter: Selectable per channel with Hard/Soft limiter mode
Amplifier gain selectable: 23,26, 29, 32, 35 (default), 38, 41 & 44 dB

Connectors & backpanel controls
2 balanced female XLR-3
2 speakon speaker outputs
Input sensitivity selector: 0.77V / 1.0V / 1.4V
Mode selector: Parallel, Stereo & Bridge
Ground: Lift & Gnd
Dip Switch: Dip-switches to control Gain, Option active, Bridge A+B, VPL & Mode

Cooling: Two Front-to-back fans, temperature controlled speed.
Weight: 12 Kg. / 26.4 lbs.
Dimension: 483 x 343 x 88 mm. / 19x13.5x3.5 in.

Power Range (115V/230V)
Download all our support files for this product