-
DSP MODULE
Equipped with a powerful DSP module, which can easily be controlled by a computer, this amplifier can handle all the parameters of a powerful high-definition DSP processor, without the need for any additional equipment.
-
WEIGHT / POWER
The combination of its class AB amplification and its switching power source makes the entire Steel Series a perfect combination of sound fidelity and power. In addition, thanks to its source, the amplifiers noticeably reduce their weight, providing a really excellent weight / power relation.
-
SIGNAL PROCESSING
Thanks to the design of its processor and the incorporation of euroblock connectors, the amplifier can not only handle all the parameters of its signal, but it can also send processed signal to other amplifiers of the Steel Series and control them remotely.
DSP Professional power amplifier - 4 x 1300W @ 4 ohms
Steel S13.4 DSP is a professional power amplifier with an output power of 4 x 700W @ 8 ohms / 4 x 1300W @ 4 ohms and a maximum bridged output power of 2 x 2600W (RMS) @ 8 ohms. With a performance that stands out for its very low distortion and high fidelity, Steel S13.4 DSP is equipped with a switching-mode power supply. Precisely thanks to the design of its power supply, the amplifier allows the peak power to follow the dynamic range of the musical program, being able to reproduce up to twice the RMS power, without clipping. This translates, basically, into peaks with much more dynamic range than a conventional-source amplifier. Last but not least, Steel S13.4 DSP incorporates an advanced DSP module that allows the user to generate and save configurations, and send the processed signal to other amplifiers of the Steel Series.
Output
Output power (8 ohms): 4 x 700W
Output power (4 ohms): 4 x 1300W
Output power (Bridge @ 8 ohms): 2 x 2600W
Performance
Input impedance:
- Balanced: 20 kOhms
- Unbalanced: 10 kOhms
Input sensitivity: 0.775Vor1.4V
Frequency Response: 20Hz~20KHz
THD: <0.05%
Damping factor (8 ohms) 10Hz-400Hz: >200
Crosstalk (at 1Khz): -75dB
Signal to noise ratio: >100dB
Slew rate: 20V/us
Voltage gain: 37.8dB
Intermodulation distortion: =/<0.35%
Protections: Thermal, short circuits, no-load, on/off muting & RF interference
DSP Processor
Software - Windows® compatible
Input
- Channel gain and mute
- Input sensitivity selector
- Input assignable between 4 channels
- Frequency generator selectable to any channel
- Signal meters
Output
- Boost per channel
- Crossover per channel
- 10 parametric equalizers per channel
- Delay per channel (in milliseconds or meters)
- Limiter per channel
- Bridge selector by output
- Signal meters
Connectors & back panel controls
Power supply connector: Interlock In
4 XLR-3 inputs
4 Speakon speaker outputs
4 Eurolock outputs
Bridge, parallel & input sensibility switch
Physical
Cooling: Two Front-to-back fans, temperature controlled speed.
Net Weight: 13 kg. / 28.6 lbs.
Dimensions: 482x349x88 mm. / 19x13.7x3.5 in.
